01
Look at both ends

- 1
GateThe sprung arm that opens to take a ring, and closes under its own spring.
- 2
BodyCarries the gate. Its opening is what has to clear the ring you intend to use.
- 3
Swivel eyeTakes the strap and turns, so the strap does not wind up as the bag is carried.
Compare the opening gate at one end and the loop or eye accepting the strap at the other. Check whether the eye swivels or is fixed. The hook must suit the ring or bridge it clips onto.
The illustration explains the shape only. It does not represent a rated component for climbing, fall protection or any other safety-critical use.
02
Measure the connection, not just the length
Overall length helps identify the silhouette, but it does not tell you what can pass through the fitting.
- Measure the clear strap-eye opening and the strap width.
- Record overall length and photograph the gate opening.
- Include the mating ring or attachment in a separate reference photo.
03
Shortlist and verify
Start with a single, well-lit hook in your search photo. Compare the gate and eye after finding visually similar pieces.
Similar size or colour is not a load rating: two clasps that look alike can be built for very different work.
An illustration is not a product specification. Confirm dimensions, material, finish and intended use with your supplier before ordering; appearance does not establish load capacity or interchangeable parts.









