Skip to content
A silver reversible buckle with a swivel joint and a twisted two-tone leather belt.Reference image

Belt hardware / reference

Reversible belt buckles

A reversible buckle lets its orientation change so a reversible belt can present either face. A rotating fitting must suit the belt attachment as well as the visible buckle shape.

7 fittings
Belt hardware
Reviewed

01

Find the rotating connection

Locate the part between the belt and the buckle that turns or releases for reversal. Compare its orientation and the way the belt is secured. A fixed buckle with a similar outline may not perform the same job.

The name “reversible” describes the function, not a universal connector. Different designs may use different clamps, fasteners or clearances.

02

Photograph both orientations

Keep your reference images separate and clearly labelled.

  1. Photograph the front and back, including the attachment.
  2. Show each orientation if the mechanism moves freely; do not force it.
  3. Measure belt width and thickness and the usable strap opening.

03

Check the whole connection

Look for enough space around the rotating fitting and verify that the fastening holds the actual belt material correctly. A front photograph cannot establish these details.

Use matching photos to narrow the collection, then confirm the mechanism, dimensions and compatibility with your supplier before replacing a component.

Note

An illustration is not a product specification. Confirm dimensions, material, finish and intended use with your supplier before ordering; appearance does not establish load capacity or interchangeable parts.

Find a match

Have one in hand?

Photograph the piece and we will put the closest matches in the collection first.

The family

Other belt hardware

Next, probably