Skip to content
A curved silver shoe chain on folded ivory leather against a burgundy backdrop.

Shoe hardware / reference

Shoe chains

A shoe chain — also called a vamp chain, a boot chain or, on a loafer, a horsebit — is a linked metal ornament that spans the vamp or a strap. It decorates rather than fastens, on loafers, pumps, sandals, flip-flops and boots.

6 kinds in the family
Shoe hardware
Reviewed

01

Parts of a shoe chain

A shoe chain is a row of links or plates with a fixing at each end. The ends decide how it fits: loops or bars that a tab of leather passes through, rivet or sew-through holes, or hooks and clasps on chains made to come off.

Fixed chains go on while the upper is made, their end tabs stitched into the vamp or strap. Detachable chains clip onto the laces, a strap or the heel of a finished shoe or boot.

02

Types of shoe chain

The horsebit is the classic loafer chain: two rings joined by a jointed bar, after the snaffle bit of a bridle, held across the vamp by two leather tabs. Vamp chains of cast plates or links do the same job on pumps and flats, and some are set with rhinestones or imitation pearls.

Sandals and flip-flops carry chains across the toe or ankle, and branched chains that follow a T-strap or a toe post. Boot chains are longer — worn round the heel and under the arch, closed with a clasp — while a single motif fixed in one place is a shoe ornament rather than a chain.

03

Shoe chain sizes

Like a buckle, a chain’s end loops are named by the width of what passes through them: an 8 mm loop takes an 8 mm tab. Measure the span along the curve of the vamp, on the last or a made-up shoe, not straight across a flat pattern.

If one chain will serve a whole size run, try it on the smallest and the largest shoe — a span that suits a 36 can look short on a 41.

What to measure on a shoe chain
MeasurementHow to take itWhat it must match
LengthOverall, outside end to outside endThe span across the vamp or strap
End openingInside each end loop or barThe width of the tab or strap it takes
WidthAcross the widest link or plateThe room between the toe and the throat
DepthFrom the back to the highest pointHow far it stands proud of the upper

04

Materials and finishes

Horsebits and plate links are usually die-cast in zinc alloy or brass; fine chain is formed from steel or brass wire. Soldered links cannot be prised open the way open jump rings can, so ask how the links are closed. Which material a given piece is made in is confirmed with your representative.

Across the collection, pieces come plated in six colours: gold, silver, rose gold, gunmetal, black and antique bronze. Links rub on each other as the foot flexes, so plating wears first where they touch; hardware finishes compares how each colour wears.

05

Ordering shoe chains

Rayestar supplies companies — shoe makers, brands and wholesalers — rather than individuals. Open a trade account and one representative handles your samples, prices and orders.

  1. Find the chain by photo or SKU, and note its length and end openings.
  2. Choose the plating colour, and say whether the chain is sewn in or clipped on.
  3. Give the quantity in pairs; your representative confirms price, samples and lead time.

Questions

Questions buyers ask

What is a horsebit on a loafer?
A metal chain of two rings joined by a jointed bar, shaped after a horse’s snaffle bit and held across the vamp by leather tabs. It is decoration: the loafer stays on by its fit.
How are shoe chains attached?
Most are sewn in as the shoe is made: leather tabs pass through the end loops and are stitched to the vamp or strap. Others are riveted, stitched through holes, or hooked on with clasps so they can come off.
What is the difference between a shoe chain and a shoe ornament?
A chain is made of links, spans a distance and is fixed at both ends; an ornament is a single piece fixed in one place. Both are decoration, and neither closes the shoe.
How long should a shoe chain be?
As long as the span it covers, measured along the curve of the vamp or strap. Its end loops are named by the tab or strap they take: a 10 mm loop for a 10 mm tab.
Sewn-in or detachable: which shoe chain should I choose?
Sewn-in for a chain that belongs to the design for the life of the shoe; detachable, on hooks or clasps, for a chain sold as an accessory or swapped between pairs. Check that the clasp is small enough not to scratch the upper.
Are decorative shoe chains the same as ice chains?
No. Ice or traction chains are a rubber harness with steel chain or studs, stretched over the sole for grip. A decorative shoe chain sits on the upper and changes only the look.
Note

The illustrations show the type, not a specific catalogue piece. Size, material, finish and lead time are confirmed for each order by the representative who handles it.

Find a match

Have one in hand?

Photograph the piece and the closest matches in the collection come first — then filter by size and finish.

The family

Other shoe hardware

Next, probably