Skip to content
A silver sandal hook with a rectangular strap slot on ivory leather and a burgundy backdrop.

Shoe hardware / reference

Sandal buckles

Sandal buckles — also called sandal hooks, shoe strap hooks or ankle strap buckles — close the strap of a sandal round the ankle, across the instep or on a T-strap. The hook kind slips into a punched hole, so the strap goes on and off without being threaded through a frame.

6 kinds in the family
Shoe hardware
Reviewed

01

Parts of a sandal hook

A sandal hook has two working parts: a closed slot that the strap end folds through and is stitched or riveted behind, and an open hook on the other side. The hook passes through a punched hole in the opposite strap, or a ring sewn to it, and the strap’s tension keeps it there.

With a row of holes punched, the strap adjusts like a belt; with one, it closes at a set length and fastens faster. Shaped like a G, an S or a figure 5, a sandal hook has no prong and no moving part.

02

Types of sandal buckle

Sandal hooks are the quickest to fasten. Small heel-bar and roller buckles are the classic alternative — the prong takes a punched hole and the loose end tucks into a keeper — and they are the same pin buckles used on belts, scaled down to an ankle strap.

A hook can also catch a D ring sewn to the opposite strap, sparing the leather a punched hole. Straps that should open under the thumb take quick-release shoe buckles; a buckle that is only decoration, on a strap closed by elastic, is a shoe ornament.

03

Sandal buckle sizes

Like any buckle, a sandal buckle is named by the strap width it takes: a 10 mm buckle is made for a 10 mm strap. Check two openings — the slot’s inner width, which matches the strap, and the hook’s throat, which must clear the thickness of the strap it passes through.

The inner-width rule is the same as for belts; the full method is in how to measure a belt buckle.

Common sandal strap widths
Strap widthNearest inch sizeUsually for
6 mm1/4 in (6.35 mm)Fine straps on heeled sandals
8 mm5/16 in (7.9 mm)Ankle straps and T-straps
10 mm3/8 in (9.5 mm)Ankle straps
12 mm1/2 in (12.7 mm)Wider ankle straps
15 mm5/8 in (15.9 mm)Instep straps
20 mm3/4 in (19 mm)Wide instep straps and men’s sandals

04

Materials and finishes

Shaped sandal hooks are usually die-cast in zinc alloy; simple hooks are bent from brass or steel wire. A sandal buckle sits on bare skin and meets water and sweat, so for the EU ask for nickel-release results to EN 1811, and for a corrosion test. Which material a given piece is made in is confirmed with your representative.

Across the collection, pieces come plated in six colours: gold, silver, rose gold, gunmetal, black and antique bronze. On a fine strap the hook may be the only metal on show, and colour can vary between plating batches, so order matching buckles, rivets and ornaments together.

05

Ordering sandal buckles

Rayestar supplies companies — shoe makers, brands and wholesalers — rather than individuals. Open a trade account and one representative handles your samples, prices and orders.

  1. Find the hook or buckle by photo or SKU, and note the strap width it takes.
  2. Choose the plating colour, and say how the strap is fixed to the slot.
  3. Give the quantity; your representative confirms price, samples and lead time.

Questions

Questions buyers ask

How does a sandal hook work?
The strap end is stitched through the hook’s slot; the open hook then slips through a punched hole or a ring on the opposite strap, and the strap’s tension holds it. Unhooking it takes one movement.
What size buckle fits a 10 mm sandal strap?
A 10 mm buckle — sandal buckles, like belt buckles, are named by the strap they take. Measure the slot’s inner width; the outside of the buckle does not decide the fit.
Sandal hook or pin buckle: which should I use?
A hook fastens faster and shows less metal; a pin buckle adjusts more finely. A hook relies on tension, so on a slack strap it can lift out, where a prong stays in its hole.
How do you attach a sandal buckle to a strap?
Fold the strap end through the slot, or round the bar, and stitch or rivet it closed behind. Then punch the opposite strap where the hook or prong should sit for the fit you want.
Do sandal buckles need to be nickel-free?
For the EU, metal in prolonged contact with the skin may release no more than 0.5 µg of nickel per cm² per week, measured by EN 1811. Ask for test results for the finish you order — the colour name alone does not tell you.
Note

The illustrations show the type, not a specific catalogue piece. Size, material, finish and lead time are confirmed for each order by the representative who handles it.

Find a match

Have one in hand?

Photograph the piece and the closest matches in the collection come first — then filter by size and finish.

The family

Other shoe hardware

Next, probably