Skip to content
A brushed gunmetal clip buckle showing its clamping jaw and gripping teeth.

Belt buckles / reference

Clamp belt buckles

A clamp belt buckle — also called a clip belt buckle or clip-on buckle — fixes to the strap with a hinged clamp whose teeth bite the cut end, in place of stitching, rivets or screws. It is the fitting of cut-to-fit dress belts, and the same clamp holds the strap on many reversible and automatic buckles.

7 kinds in the family
Belt buckles
Reviewed

01

How a clamp buckle holds the strap

The front is an ordinary buckle: usually a frame and prong, sometimes a solid plate. Where a pin buckle has its bar and folded chape, a clamp buckle has a hinged plate lined with teeth, which closes over the end of the strap and grips it across its full width.

The strap is cut square, pushed fully into the clamp, and the plate pressed flat. Nothing is punched at the buckle end; a prong-front clamp buckle still closes through the usual row of holes at the tip end.

02

Pin, plate and swivel clamp buckles

Most clamp buckles are pin buckles with a clamp in place of the chape: a clean fitting for dress belts, with no stitching or rivets on show. Plate-front clamp buckles carry the design on a solid face and hide the closure behind it.

Mount the clamp on a swivel and the buckle becomes one of the reversible belt buckles, turning so one strap shows either face. Many automatic belt buckles hold their strap with the same kind of clamp, so the strap is trimmed the same way.

03

Clamp buckle sizes

A clamp buckle is named by the strap width it takes — a 35 mm buckle for a 35 mm strap — and its clamp is made to that width. Thickness matters as much: the clamp closes flat only on a strap close to the thickness it was made for, so measure the strap’s thickness as well as its width.

The full method is in how to measure a belt buckle.

Common clamp buckle widths
Strap widthNearest inch sizeUsually for
25 mm1 in (25.4 mm)Women’s belts
30 mm1 3/16 inNarrow dress belts
32 mm1 1/4 in (31.75 mm)Dress belts
35 mm1 3/8 inMen’s dress and cut-to-fit belts
38 mm1 1/2 in (38.1 mm)Casual belts
40 mm1 9/16 inCasual and jeans belts

04

Materials and finishes

Most clamp buckles for fashion belts are die-cast in zinc alloy and then plated; stainless steel and solid brass are the heavier alternatives. The clamp and its hinge are the parts that get handled, so check on a sample that the clamp lifts and closes cleanly and lies flat.

Across the collection, pieces are plated in six colours: gold, silver (nickel, in trade terms), rose gold, gunmetal, black and antique bronze.

05

Ordering clamp belt buckles

Rayestar supplies companies — belt makers, brands, wholesalers and importers — rather than individuals. Open a trade account and one representative handles your samples, prices and orders.

  1. Find the design by photo or SKU, and note the strap width it takes.
  2. Give your strap’s thickness, or send a piece, so the clamp can be checked against it.
  3. Choose the plating colour and quantity; your representative confirms price, samples and lead time.

Questions

Questions buyers ask

What is a clamp belt buckle?
A buckle that grips the cut end of the strap with a hinged, toothed clamp instead of being stitched, riveted or screwed on. The front is usually a frame and prong, so the belt still closes through holes at the tip end.
How do you open a clamp belt buckle?
Lift the clamp at its free edge with a thumbnail or a flat tool; the teeth let go and the strap slides out. To close it, push the strap fully in and press the clamp flat.
How do you shorten a belt with a clamp buckle?
Open the clamp, take the strap out, cut it square at the buckle end by the length to lose, and refit it. Cutting at the buckle end leaves the holes and the tip as they were.
What is the difference between a clamp buckle and a pin buckle?
Only the fixing. A pin buckle’s strap folds round its bar and is stitched, riveted or screwed; a clamp buckle grips the cut end, so the strap can be trimmed and the buckle changed without unpicking anything.
Will a clamp buckle fit any belt?
Only a strap of the width and thickness it was made for: a 35 mm clamp takes a 35 mm strap, and a strap much thicker than the clamp’s opening stops it closing flat.
Can companies buy clamp belt buckles in bulk?
Yes. Rayestar supplies belt makers, brands, wholesalers and importers; once your company is reviewed, one representative handles samples, quantities and orders.
Note

The illustrations show the type, not a specific catalogue piece. Size, material, finish and lead time are confirmed for each order by the representative who handles it.

Find a match

Have one in hand?

Photograph the piece and the closest matches in the collection come first — then filter by size and finish.

The family

Other belt buckles

Next, probably