Skip to content
A plain gunmetal plate buckle with a silver rim and fastening behind the face.

Belt buckles / reference

Plate buckles

A plate buckle — also called a plaque buckle, or in western wear a trophy buckle — carries its design on one broad face and hides the fastening behind it. It closes men’s casual and western belts, and smaller plate buckles finish women’s belts and bag straps.

7 kinds in the family
Belt buckles
Reviewed

01

How a plate buckle fastens

Behind the face sit two working parts: a bar, which the buckle end of the strap folds round, and a stud or hook, which passes through a hole in the free end. The belt still adjusts by a row of holes, but the one in use sits behind the plate, and no frame or prong shows.

The buckle end is fixed in one of four ways: stitched or riveted for good; held by snaps — line 24 on heavier straps, line 20 on lighter ones — so the buckle can be changed; closed with a Chicago screw; or gripped by a toothed clamp, as on clamp belt buckles.

02

Plaque, trophy and small plate buckles

Rectangular plaque buckles suit dress and casual belts, and large oval trophy buckles belong to western wear, where they were traditionally awarded at rodeos. Small plate buckles, from about 15 mm, close women’s belts, bag straps and shoe straps.

A strap that closes with snaps at the buckle end takes any plate buckle of the same width, which is how interchangeable belts work.

03

Plate buckle sizes

A plate buckle is named by the strap width it takes, measured at the bar behind the face rather than across the face: a western plate 90 mm across may still take a 38 mm strap. Check the stud as well; it must pass through the strap’s thickness and suit the size of its holes.

The method is set out in how to measure a belt buckle.

Common strap widths for plate buckles
Strap widthNearest inch sizeUsually for
15 mm5/8 inShoe and bag straps
20 mm3/4 in (19 mm)Women’s belts, bag straps
25 mm1 in (25.4 mm)Women’s belts
35 mm1 3/8 inMen’s dress belts
38 mm1 1/2 in (38.1 mm)Casual, western and interchangeable belts
40 mm1 9/16 inWide casual belts

04

Materials and finishes

Most plate buckles are die-cast in zinc alloy, which fills fine relief and lettering and takes enamel colour and plating well; solid brass and stainless steel plates are heavier. Antique finishes suit them: the recesses are darkened and the high points relieved, so the relief reads clearly.

Across the collection, pieces come plated in six colours: gold, silver, rose gold, gunmetal, black and antique bronze.

05

Ordering plate buckles

Rayestar sells to companies, not individuals: belt and leather-goods makers, brands, wholesalers and importers. Open a trade account, and one representative looks after your samples, prices and orders.

  1. Find the plate by photo or SKU, and note the strap width it takes.
  2. Say how the buckle end will be fixed: snaps, screw, rivets, stitching or clamp.
  3. Give the plating colour and quantity; your representative confirms price, samples and lead time.

Questions

Questions buyers ask

What is a plate belt buckle?
A buckle whose front is one solid face — the plate — with the fastening behind it: a bar for the buckle end of the strap, and a stud or hook that takes a hole in the free end.
What is the difference between a plate buckle and a pin buckle?
A pin buckle shows its frame and prong, and the prong passes through a hole from the front; a plate buckle covers the closure, and its stud enters the hole from behind. Both adjust by holes.
How do you attach a plate buckle to a belt?
Fold the buckle end of the strap round the bar behind the plate and fix it with snaps, a Chicago screw, rivets or stitching; then pass the stud through a hole in the free end. Snaps and screws let the buckle be changed later.
What is a trophy buckle?
The large oval plate buckle of western wear, traditionally awarded at rodeos. It goes on a belt with snaps at the buckle end, usually 38 mm (1 1/2 in) wide.
Are plate buckles interchangeable?
On a strap with snaps or a screw at the buckle end, yes: any plate buckle made for the same strap width fits it. A stitched or riveted buckle stays where it is.
Do you supply plate buckles to companies only?
Yes. Rayestar sells to belt makers, brands, wholesalers and importers, not to individuals; one representative handles samples, quantities and orders for each account.
Note

The illustrations show the type, not a specific catalogue piece. Size, material, finish and lead time are confirmed for each order by the representative who handles it.

Find a match

Have one in hand?

Photograph the piece and the closest matches in the collection come first — then filter by size and finish.

The family

Other belt buckles

Next, probably