01
How a strap anchor is fixed
A strap anchor is an arch on two feet. Each foot is fixed through the bag wall: with a screw into a post or nut behind the panel, with rivets, or — on stamped anchors — with prongs pushed through and bent flat behind a washer. A backing plate or reinforced lining behind the feet spreads the pull.
What passes under the arch is the strap itself, a ring for a swivel snap hook to clip onto, or the end of a handle. The catalogue files strap anchors as arch bridges, after their Chinese trade name, 拱桥.
02
Types of strap anchor
Arches are round-topped or square-cornered, plain or shaped. A ring or D ring can be captured under the arch before it is fixed, ready for a hook; handle holders are shaped to take the end of a rolled or flat handle.
Screw-fixed anchors can be taken off again, to replace a strap or repair a bag; riveted and pronged ones are permanent.
03
Strap anchor sizes
A strap anchor is named by its inside width — the clear span under the arch — which should match the strap or ring that passes through it: a 25 mm anchor takes a 25 mm strap. Check the inside height against the strap’s thickness or the ring’s wire, and the distance between the fixing holes, centre to centre, before the bag panel is punched.
Give the thickness of the bag wall with its lining and stiffener, so screws or posts of the right length can be matched to it.
| Inside width | Nearest inch size | Takes |
|---|---|---|
| 16 mm | 5/8 in (15.9 mm) | Narrow straps and small rings |
| 20 mm | 3/4 in (19.05 mm) | Crossbody straps, 20 mm rings |
| 25 mm | 1 in (25.4 mm) | Shoulder straps, 25 mm rings |
| 32 mm | 1 1/4 in (31.75 mm) | Tote straps and handle ends |
| 38 mm | 1 1/2 in (38.1 mm) | Wide straps and handles |
04
Materials and finishes
Many strap anchors are die-cast in zinc alloy, which allows a solid, shaped arch; stamped steel anchors are lighter and fix with prongs, and solid brass ages to a patina. Which material a given anchor is made in is confirmed with your representative.
Across the collection, pieces come plated in six colours: gold, silver, rose gold, gunmetal, black and antique bronze, so anchors, hooks and rings can be ordered in one finish.
05
Ordering strap anchors
Rayestar supplies companies — handbag and leather-goods makers, brands and wholesalers — rather than individuals. Open a trade account and one representative handles your samples, prices and orders.
- Find the anchor by photo or SKU, and note its inside width.
- Give the bag wall’s thickness and how the anchor should be fixed, and choose the plating colour.
- Give the quantity; your representative confirms price, samples and lead time.
Questions
Questions buyers ask
- What is a strap anchor on a bag?
- A metal arch fixed through the bag’s body, giving a strap, ring or handle somewhere to attach. Bag makers also call it a bridge, strap connector or strap arch.
- How do you attach a strap anchor to a bag?
- Mark and punch a hole for each foot, back the panel with a reinforcing piece, then fix the feet through it with their screws, rivets or prongs. If a ring is to sit under the arch, put it in place before the anchor is fixed.
- What size strap anchor do I need for a 1 inch strap?
- One with a 25 mm (1 in) inside width, measured under the arch. Check too that the arch is tall enough for the strap’s thickness or for the wire of a ring.
- Strap anchor or sewn D ring tab: which should I use?
- A sewn tab is made with the bag and suits soft constructions; an anchor is fixed through the finished panel, suits structured and leather bags, and shows as hardware. Both carry a ring or a hook the same way.
- Can a strap anchor carry a heavy bag?
- It is a fixing point for a bag strap, not a rated load point: how much it holds depends as much on the panel and its backing as on the anchor. Lifting and safety uses need rated hardware.
- Can I buy strap anchors in bulk?
- Yes, as a company: handbag makers, brands and wholesalers register, have their company details reviewed, and order through one representative.
The illustrations show the type, not a specific catalogue piece. Size, material, finish and lead time are confirmed for each order by the representative who handles it.








