01
What each ring is for
A D ring has one straight side for the strap to wrap around, so the strap lies flat, and a curved side where a swivel snap hook or another strap can ride. An O ring is round all the way, so whatever hangs from it turns freely, and a strap wrapped round it gathers slightly into the curve.
Rectangle and square rings hold a strap flat on both sides, which suits handles and joins between two flat straps. Each is fixed by looping the strap through and stitching or riveting the loop closed; where each sits on a bag is shown in bag hardware names.
02
Welded, cast and split rings
Wire rings are bent to shape and welded, so the join cannot open. Cast rings are made in one solid piece, often in zinc alloy or brass, and can carry a shaped or patterned face. Signed in, you can filter the collection by shape, finish and measurements, or start from a photograph.
A split ring keeps a gap at the join: it can be opened to add a part, and that gap can also spread under pull, so it suits charms and light, decorative straps. Rings with a spring or screw gate open on purpose; two D rings sewn side by side make the friction fastening of double D rings.
03
O ring and D ring sizes
D rings and rectangle rings are named by inside width — the length of the straight side inside the ring — which equals the strap width: a 25 mm D ring for a 25 mm strap. O rings are named by inside diameter and wire thickness, and a 25 mm O ring takes a 25 mm strap.
For a thick or doubled strap, check the inside depth as well, and check the wire against the hook that will clip on: it has to pass the hook’s gate. Bag straps commonly run 20, 25, 32 and 38 mm (3/4, 1, 1 1/4 and 1 1/2 in); 20 mm and 3/4 in differ by about a millimetre, so order rings to the strap you use.
| Ring | Named by | Also check |
|---|---|---|
| D ring | Inside width of the straight side | Inside depth, wire thickness |
| O ring | Inside diameter | Wire thickness |
| Rectangle or square ring | Inside width | Inside height, wire thickness |
04
Ring materials and finishes
Welded rings are usually formed from steel or brass wire, and cast rings are mostly zinc alloy or brass. Plated steel rusts where its plating is broken, so salt air and wet use call for stainless steel — 316, with its molybdenum, resists pitting better than 304.
Across the collection, pieces come plated in six colours: gold, silver, rose gold, gunmetal, black and antique bronze; rings are usually ordered in the colour of the hooks and buckles on the same strap. Fashion rings are not rated for lifting, climbing or restraining animals — those uses need rated hardware.
05
Ordering O rings and D rings
Rayestar supplies companies — bag, belt and garment makers, brands, wholesalers and importers — not individuals. Open a trade account and one representative handles your samples, prices and orders.
- Find the ring by photo or SKU, and note the strap width it takes.
- Choose the plating colour, and say what clips on, so the wire suits the hook.
- Give the quantity; your representative confirms price, samples and lead time.
Questions
Questions buyers ask
- D ring or O ring: which should a strap use?
- A D ring where the strap should lie flat and a hook hang from one side, as on most bag straps. An O ring where the parts it joins must turn in any direction, such as a chain, a charm or two straps meeting at an angle.
- What size D ring do I need for a 1 inch strap?
- A 25 mm (1 in) D ring: D rings are named by the inside width of the straight side, which should equal the strap. 1 inch is 25.4 mm, so order the strap and the ring in the same units.
- How are O rings measured?
- By inside diameter and wire thickness. The inside diameter tells you the strap it takes; the wire thickness, how heavy it looks and whether it fits through the gate of the hook that clips on.
- What is the difference between a welded ring and a split ring?
- A welded ring is closed for good at the join. A split ring keeps a gap there: it can be opened to add or remove a part, but the gap can also spread under pull, so it suits light or decorative use.
- Are metal O rings the same as rubber O-rings?
- No. Rubber O-rings are seals for pipes and machines; metal O rings are connector rings for straps, bags and garments.
- Can rings be ordered in bulk for production?
- Yes, by companies. Register your business; after the review, one representative handles samples, quantities and orders.
The illustrations show the type, not a specific catalogue piece. Size, material, finish and lead time are confirmed for each order by the representative who handles it.












