01
How a center bar buckle works
The bar divides the frame into two openings. The strap end is punched with a slot for the prong, folded around the bar so the prong comes through, and closed behind the buckle with stitching, rivets or a screw; the prong then takes a hole at the other end of the strap.
The half of the frame beyond the bar holds the strap end flat, so the buckle does a keeper’s job. A heel-bar pin buckle, with its bar at one end, needs a separate keeper for that.
02
Single prong, double prong, cast and wire
Single-prong center bar buckles close dress and casual belts and most bag and shoe straps. Double-prong versions take two oblong holes and share the pull on wide or heavy straps.
Cast frames carry a shaped or patterned face; frames formed from wire keep a plain, light line. Shapes run from rectangle and square to oval, round and D. Signed in, you can filter the collection by shape, finish and measurements, or start from a photograph.
03
Center bar buckle sizes
A center bar buckle is named by the strap width it takes: a 38 mm buckle for a 38 mm strap. Measure the clear opening inside the frame — it usually runs about a millimetre over the nominal size — and check the frame’s inner height against the strap’s thickness.
The full method, with strap thickness and the outside dimensions, is in how to measure a belt buckle.
| Strap width | Nearest inch size | Usually for |
|---|---|---|
| 13 mm | 1/2 in (12.7 mm) | Shoe and sandal straps |
| 20 mm | 3/4 in (19 mm) | Bag straps, narrow belts |
| 25 mm | 1 in (25.4 mm) | Women’s belts, bag straps |
| 32 mm | 1 1/4 in (31.75 mm) | Dress belts |
| 35 mm | 1 3/8 in | Men’s dress belts |
| 38 mm | 1 1/2 in (38.1 mm) | Casual and jeans belts |
| 40 mm | 1 9/16 in | Wide casual and work belts |
04
Center bar buckle materials and finishes
Most fashion center bar buckles are die-cast in zinc alloy, which takes fine detail and plates well. Solid brass is heavier and darkens to a patina, stainless steel suits wet and outdoor wear, and steel wire is chosen for value; the material of a given piece is confirmed with your representative.
Across the collection, pieces come plated in six colours: gold, silver, rose gold, gunmetal, black and antique bronze. In the trade, silver is often called nickel colour, and black may be black nickel or an e-coat.
05
Ordering center bar buckles
Rayestar supplies companies — belt and bag makers, brands, wholesalers and importers — not individuals. Open a trade account and one representative handles your samples, prices and orders.
- Find the design by photo or SKU, and note the strap width it takes.
- Choose the plating colour, and say whether you need one prong or two.
- Send the quantity; your representative confirms price, samples and lead time.
Questions
Questions buyers ask
- What is the difference between a center bar and a heel bar buckle?
- Where the prong’s bar sits. A heel-bar buckle has it at one end of the frame and needs a separate keeper; a center bar buckle has it across the middle, and the frame beyond it holds the strap end.
- Does a center bar buckle need a belt keeper?
- Not to work: the far half of the frame holds the strap end flat. Some belts add one for the look, or to hold a long tip — see belt keepers.
- What size center bar buckle fits a 1 1/2 inch belt?
- A 38 mm one: buckles are named by the strap width they take, and 1 1/2 inches is 38.1 mm. Measured inside the frame, its opening runs a little over 38 mm; the outside size does not affect the fit.
- How do you attach a strap to a center bar buckle?
- Punch a slot for the prong where the strap will fold, pass the end around the center bar with the prong through the slot, and close the fold behind the buckle with stitching, rivets or a screw — or with snaps, if the buckle is to be changed.
- Can companies buy center bar buckles wholesale?
- Yes — Rayestar sells to businesses only. Register your company; once it is reviewed, one representative handles samples, quantities and orders.
The illustrations show the type, not a specific catalogue piece. Size, material, finish and lead time are confirmed for each order by the representative who handles it.











